AMG vehicles

Drive program selector with manual drive program

For further information on the
automatic
drive program.
Only change from automatic drive program C, S or S+ to manual drive program M when the vehicle is stationary.
Turn drive program selector 1
until the
desired drive program appears in the
multifunction display in the speedometer.
The drive program indicator on drive
program selector 1 lights up in red.
The automatic transmission
shifts to
automatic drive program C each time the
engine is started.
RS cannot be selected
during normal
driving. For further information on RACE
START.
See also:
Engine
Display messages
Possible causes/consequences and Solutions
Check Coolant
Level See Operator's Manual
The coolant level is too low.
Add coolant, observing the war ...
Parking
WARNING
The Parking Guidance is only an aid and may
not detect all obstacles. The Parking
Guidance does not relieve you of the
responsibility to pay attention. You are always
responsible ...
Tread wear
The tread wear grade is a comparative rating
based on the wear rate of the tire when tested
under controlled conditions on a specified
U.S. government course. For example, a tire
graded 150 would ...
