Cornering light function

The cornering light function improves the

The cornering light function improves the illumination of the road over a wide angle in the direction you are turning, enabling better visibility in tight bends, for example. It can only be activated when the low-beam headlamps are switched on.

Active:

• if you are driving at speeds below 25 mph (40 km/h) and switch on the turn signals or turn the steering wheel.

• if you are driving at speeds between 25 mph (40 km/h) and 45 mph (70 km/h) or turn the steering wheel.

Not active: if you are driving at speeds above 25 mph (40 km/h) or switch off the turn signal or turn the steering wheel to the straight-ahead position.

The cornering light function may remain lit for a short time, but is automatically switched off after no more than three minutes.

    See also:

    Changing gear
    The automatic transmission shifts to the individual gears automatically when it is in transmission position D. This automatic gearshifting behavior is determined by: • a shift range restriction, ...

    Headlamps fogged up on the inside
    The headlamps may fog up on the inside if there is high atmospheric humidity. - Drive with the headlamps switched on. The level of moisture diminishes, depending on the length of the journey and ...

    Information about driving abroad
    Converting to symmetrical low beam when driving abroad: switch the headlamps to symmetrical low beam in countries in which traffic drives on the opposite side of the road to the country where ...