Matte finish care
If your vehicle has a clear matte finish, observe the following instructions in order to avoid damage to the paintwork due to incorrect care.
These notes also apply to light alloy wheels with a clear matte finish.
Never polish the vehicle or the light alloy wheels. Polishing causes the finish to shine.
The following may cause the paint to
become shiny and thus reduce the matte
effect:
- Vigorous rubbing with unsuitable materials.
- Frequent use of car washes.
- Washing the vehicle in direct sunlight.
Never use paint cleaner, buffing or
polishing products, or gloss preserver, e.g. wax. These products are only
suitable for
high-gloss surfaces. Their use on vehicles
with matte finish leads to considerable
surface damage (shiny, spotted areas).
Always have paintwork repairs performed
at a qualified specialist workshop, e.g. an
authorized Mercedes-Benz Center.
Do not use wash programs with a hot wax treatment under any circumstances.
The vehicle should preferably be washed by hand using a soft sponge, car shampoo and plenty of water.
Use only insect remover and car shampoo from the range of recommended and approved Mercedes-Benz care products.
See also:
Ride & Handling
The GL has a unibody frame — rare among full-size SUVs — and its
four-wheel-independent air suspension swaps traditional coil springs for
inflatable air bladders. Its ride height can be varied to ...
Active Driving Assistance package
General notes
The Active Driving Assistance package
consists of DISTRONIC PLUS
Active Blind Spot Assist an
Active Lane Keeping Assist. ...
SmartKey
0 To remove the SmartKey
1 Power supply for some consumers, such
as the windshield wipers
2 Ignition (power supply for all consumers)
and drive position
3 To start the engine
The SmartKey can ...