Vehicle
Activating/deactivating the automatic door locking feature
If you select the Auto. Door Locks function, the vehicle is centrally locked above a speed of around 9 mph.
For further information on the automatic locking feature, see.
•► Press the
button on the
steering wheel to select the Settings
menu.
•► Press the
button to select the
Vehicle submenu.
•► Press the
button to confirm.
•► Press the
button to select the
Auto. Door Locks function.
When the Auto. Door Locks function is activated, the vehicle doors are displayed in red in the multifunction display.
•► Press the
button to save the
setting.
Activating/deactivating the acoustic locking verification signal
If you activate the Acoustic Lock function, an audible signal sounds depending on the vehicle's date of manufacture:
Rwhen locking
or
Ronce when unlocking and three times when
locking
•► Press the
button on the
steering wheel to select the Settings
menu.
•► Press the
button to select the
Vehicle submenu.
•► Press the
button to confirm.
•► Press the
button to select the
Acoustic Lock function.
If the Acoustic Lock function is activated,
the
symbol in the multifunction
display lights up red.
•► Press the
button to save the
setting.
Activating/deactivating the radar sensor system
The following systems are switched off when the radar sensor system is deactivated:
- DISTRONIC PLUS
- BAS PLUS
- PRE-SAFE® Brake
- Blind Spot Assist
- Active Blind Spot Assist
USA only: This device has been approved by the FCC as a "Vehicular Radar System".
The radar sensor is intended for use in an automotive radar system only. Removal, tampering, or altering of the device will void any warranties, and is not permitted by the FCC. Do not tamper with, alter, or use in any non-approved way.
Any unauthorized modification to this device could void the user's authority to operate the equipment.
Canada only:
This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation.
Any unauthorized modification to this device could void the user's authority to operate the equipment.
•► Press the
button on the
steering wheel to select the Settings
menu.
•► Press the
button to select the
Vehicle submenu.
•► Press the
button to confirm.
•► Press the
button to select
Radar Sensor (See Oper. Manual):.
You will see the selected setting: Enabled or Disabled.
•► Press the
button to save the
setting.
See also:
Cleaning the windows
WARNING
Before cleaning the windshield or wiper
blades, switch off the windshield wipers and
remove the SmartKey from the ignition lock.
On vehicles with KEYLESS-GO, press the
Start/S ...
Jump-starting
WARNING
Failure to follow these directions will cause damage to the electronic
components, and can lead
to a battery explosion and severe injury or death.
Never lean over batteries while connec ...
Adjusting the NECK-PRO head restraints
Adjusting
Adjusting
Pull or push the bottom of NECK-PRO head
restraint 1.
Resetting
The NECK-PRO head restraints are moved
forwards in the event of a rear collision in the
direction of tr ...
