Using KEYLESS-GO
The KEYLESS-GO key must be outside the vehicle. All the doors must be closed.
•► Touch recessed sensor surface 1 on the door handle until the side windows and the sliding sunroof or the panorama roof with power tilt/sliding panel are fully closed.
Make sure you only touch recessed sensor surface 1.
•► Make sure that all the side windows and the sliding sunroof or panorama roof with power tilt/sliding panel are closed.
On vehicles with a panorama roof with power tilt/sliding panel:
•► Touch recessed sensor surface 1 on the door handle again until the roller sunblinds of the panorama roof with power tilt/ sliding panel close.
•► To interrupt convenience closing: release recessed sensor surface 1 on the door handle.
See also:
Automatic transmission
Shift the transmission to position P. The transmission position display in the
multifunction display shows P.
You can also start the engine when the transmission is in position N. ...
High-beam flasher
To switch on: turn the SmartKey in the ignition lock to position 1 or
2 or start the engine.
Pull the combination switch in the direction of arrow 3.
...
Lowering the vehicle
– Place the ratchet wrench onto the hexagon
nut of the jack so that the letters AB are
visible.
– Turn the ratchet wrench until the vehicle is
once again standing firmly on the ground.
– Place ...