Lights
Display messages about LEDs:
This display message will only appear if all LEDs have failed.
| Display messages | Possible causes/consequences and
Solutions |
![]() |
The left or right-hand cornering light is defective. – Check whether you are permitted to change the bulb yourself. or – Visit a qualified specialist workshop. |
![]() |
The left or right-hand low-beam headlamp is defective. – Check whether you are permitted to change the bulb yourself. or – Visit a qualified specialist workshop. |
![]() |
The left or right-hand trailer tail lamp is faulty. – Check whether you are permitted to change the bulb yourself. or – Visit a qualified specialist workshop. |
![]() |
The left or right-hand trailer turn signal lamp is defective. – Check whether you are permitted to change the bulb yourself. or – Visit a qualified specialist workshop. |
![]() |
The trailer brake lamp is defective. – Check whether you are permitted to change the bulb yourself. or – Visit a qualified specialist workshop. |
![]() |
The rear left-hand or rear right-hand turn signal is defective. – Check whether you are permitted to change the bulb yourself. or – Visit a qualified specialist workshop. |
![]() |
The front left-hand or front right-hand turn signal is defective. – Check whether you are permitted to change the bulb yourself. or – Visit a qualified specialist workshop. |
![]() |
The turn signal in the left-hand or right-hand exterior mirror is
defective. – Check whether you are permitted to change the bulb yourself. or – Visit a qualified specialist workshop. |
![]() |
The high-mounted brake lamp is faulty. – Check whether you are permitted to change the bulb yourself. or – Visit a qualified specialist workshop. |
![]() |
The left or right-hand brake lamp is defective. – Check whether you are permitted to change the bulb yourself. or – Visit a qualified specialist workshop. |
![]() |
The left or right-hand high beam is defective. – Check whether you are permitted to change the bulb yourself. or – Visit a qualified specialist workshop. |
![]() |
The license plate lamps are faulty. – Check whether you are permitted to change the bulb yourself. or – Visit a qualified specialist workshop. |
![]() |
The rear fog lamp is defective. – Check whether you are permitted to change the bulb yourself. or – Visit a qualified specialist workshop. |
![]() |
The front left or front right parking or standing lamp is
defective. – Check whether you are permitted to change the bulb yourself. or – Visit a qualified specialist workshop. |
![]() |
The backup lamp is defective. – Check whether you are permitted to change the bulb yourself. or – Visit a qualified specialist workshop. |
![]() |
The left or right front side marker lamp is defective. – Check whether you are permitted to change the bulb yourself. or – Visit a qualified specialist workshop. |
![]() |
The left or right-hand tail lamp is defective. or The rear left or right side marker lamp is defective. – Check whether you are permitted to change the bulb yourself. or – Visit a qualified specialist workshop. |
![]() |
The left or right-hand daytime running lamp is defective. – Check whether you are permitted to change the bulb yourself. or – Visit a qualified specialist workshop. |
![]() |
The active light function is defective. – Visit a qualified specialist workshop. |
![]() |
The exterior lighting is defective. – Visit a qualified specialist workshop. |
![]() |
The light sensor is defective. – Visit a qualified specialist workshop. |
![]() |
The lights are still switched on when you leave the vehicle. A
warning tone also sounds. – Turn the light switch to
or . |
![]() |
Adaptive Highbeam Assist is faulty. – Visit a qualified specialist workshop. |
![]() |
Adaptive Highbeam Assist is deactivated and temporarily inoperative.
Possible causes are: - the windshield in the camera's field of vision is dirty. - visibility is impaired due to heavy rain, snow or fog. – Clean the windshield. If the system detects that the camera is fully functional again, the Adaptive Highbeam Assist Now Available display message is shown. Adaptive Highbeam Assist is operational again. |
See also:
Setting a speed
WARNING
Keep in mind that it may take a brief moment
until the vehicle has made the necessary
adjustments.
Increase or decrease the set vehicle speed to
a value that the prevailing ro ...
Resetting values
You can reset the values of the following
functions:
- Trip odometer
- Trip computer "From start"
- Trip computer "From reset"
•► Press the butt ...
Rear-view mirror
Rear-view mirror (manual anti-glare)
► anti-glare mode: flick anti-glare
switch 1 forwards or back. ...

Solutions





















or
.
