Changing the windshield wiper blades

Removing the wiper blades

- Remove the SmartKey from the ignition lock.

- Fold the wiper arm away from the windshield.

- Firmly press release knob 1 and pull the

- Firmly press release knob 1 and pull the wiper blade upwards from the wiper arm in the direction of the arrow.

Installing the wiper blades

- Position the new wiper blade in the retainer on the wiper arm and slide it into place in the opposite direction to the arrow.
The wiper blade audibly engages.
- Make sure that wiper blade is seated correctly.
- Fold the wiper arm back onto the windshield.

    See also:

    General notes
    USA only: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must ...

    Important safety notes
    See the "Important safety notes" section. If ESP® detects that the vehicle is deviating from the direction desired by the driver, one or more wheels are braked to stabilize the vehic ...

    Active bonnet, seven airbags and PRE-SAFE as standard
    During the course of its development, the new E-Class was subjected to more than 150 high-speed crash tests and a total of more than 17,000 realistic crash simulations. The crumple zone principle in ...