Cleaning the display

– Before cleaning the display, make sure that it is switched off and has cooled down.
– Clean the display surface using a commercially-available microfiber cloth and TFT/LCD display cleaner.
– Dry the display surface using a dry microfiber cloth.

For cleaning, do not use any of the For cleaning, do not use any of the following:
- alcohol-based thinner or gasoline
- abrasive cleaning agents
- commercially-available household cleaning agents

These may damage the display surface. Do not put pressure on the display surface when cleaning. This could lead to irreparable damage to the display.

    See also:

    Setting the specified minimum distance
    You can set the specified minimum distance for DISTRONIC by varying the time span between one and two seconds. This time span determines the distance that DISTRONIC should maintain from the vehicl ...

    Turn signals
    1 High-beam headlamps 2 Right turn signal 3 High-beam flasher 4 Left turn signal ► To indicate briefly: press the combination switch briefly to the pressure point in the direction of a ...

    Seat belt
    Display messages Possible causes/consequences and Solutions After starting the engine, the red seat belt warning lamp lights up for six seconds. The seat belt warning lam ...