Activating/deactivating DSR
Activating
DSR can only be activated if you are driving no faster than 20 mph (30 km/h).
Vehicle without the Off-Road Pro Engineering package
Vehicle with the Off-Road Pro Engineering package
► Press button 1.
Indicator lamp 2 lights up.
The DSR symbol and a message, such as the following, appear in the multifunction display:
If the speed that is being driven is too high, the DSR symbol and the Max. speed 20 mph (Canada: 30 km/h) message appears in the multifunction display.
Deactivating
► Press button 1.
Indicator lamp 2 goes out.
The DSR symbol appears in the multifunction display with the Off message.
DSR is deactivated automatically if you are driving faster than 21 mph (Canada:
35 km/h). The DSR symbol appears in the multifunction display with the Off message.
You also hear a warning tone.
See also:
Parking lamp/standing lamp
► Switch off the lights.
► Open the hood.
► Turn bulb holder 1 counter-clockwise and
pull it out.
► Take the bulb out of bulb holder 1.
► Insert the new bulb into ...
Brow of hill
When driving up an uphill gradient, slightly
reduce pressure on the accelerator
immediately before reaching the brow of the
hill. Use the vehicle's own impetus to drive
over the top of the hil ...
Xenon bulbs
If your vehicle is equipped with Xenon bulbs,
you can recognize this by the following: the
cone of light from the Xenon bulbs moves
from the top to the bottom and back again
when you start the ...