Parking lamp/standing lamp

► Switch off the lights.
► Open the hood.
► Turn bulb holder 1 counter-clockwise and
pull it out.
► Take the bulb out of bulb holder 1.
► Insert the new bulb into bulb holder 1.
► Insert bulb holder 1 into the lamp and
turn
it clockwise.
See also:
Checking the coolant level
Only check the coolant level when the vehicle
is on a level surface and the engine has cooled
down.
Turn the SmartKey to position
2 in the ignition lock.
On vehicles with KEYLESS-GO, press the ...
Coupling up a trailer
Observe the maximum permissible trailer dimensions (width and length).
Most U.S. states and all Canadian provinces require by law:
safety chains between the towing vehicle and the trailer. The ch ...
General notes
USA only:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. this device must a ...
