Xenon bulbs
If your vehicle is equipped with Xenon bulbs, you can recognize this by the following: the cone of light from the Xenon bulbs moves from the top to the bottom and back again when you start the engine. For this to be observed, the lights must be switched on before starting the engine.
DANGER
Xenon bulbs carry a high voltage. You could
get an electric shock and be seriously or even
fatally injured if you touch the electric
contacts on Xenon bulbs. Therefore, never
remove the cover from Xenon bulbs.
Do not change Xenon bulbs yourself, but have
them replaced at a qualified specialist
workshop which has the necessary specialist
knowledge and tools to carry out the work
required.
Mercedes-Benz recommends that you use an
authorized Mercedes-Benz Center for this
purpose. In particular, work relevant to safety
or on safety-related systems must be carried
out at a qualified specialist workshop.
Bulbs and lamps are an important aspect of vehicle safety. You must therefore make sure that these function correctly at all times.
Have the headlamp setting checked regularly.
See also:
Installing/removing the towing eye
Installing the towing eye
•► Remove the towing eye from the vehicle
tool kit
WARNING
The exhaust tail pipe may be hot. You could
burn yourself if you touch the tail pipe. Be
particu ...
Front air bags
The front air bags increase protection for the
driver's and front-passenger's head and
chest.
Driver's air bag 1 deploys in front of the
steering wheel; front-passenger front air
bag 2 depl ...
Driver's knee bag
Driver's knee bag 1 provides additional
protection for the driver against:
• knee injuries
• thigh injuries
• lower leg injuries
Driver's knee bag 1 deploys below the
steering wheel. During a ...
