Towing the vehicle with the rear axle raised
Only possible on vehicles without 4MATIC.
When towing your vehicle with the rear axle raised, it is important that you observe the safety instructions
The ignition must be switched off if you are towing the vehicle with the rear axle raised. Intervention by ESP® could otherwise damage the brake system.
•► Switch on the hazard warning lamps
•► Turn the SmartKey to position 0 in the ignition lock and remove the SmartKey from the ignition lock.
•► When leaving the vehicle, take the SmartKey or the KEYLESS-GO key with you.
See also:
Automatic engine switch-off
The ECO start/stop function switches the
engine off automatically if the vehicle is
braked to a standstill and the brake remains
depressed with the transmission in position
D or N.
You can st ...
Transmission positions
Park position
Do not shift the transmission into
position P unless the vehicle is
stationary. The parking lock should
not be used as a brake when
parking. In addition to engaging the
parki ...
Setting the airflow
Turn the SmartKey to position
2 in the
ignition lock.
To increase/reduce: press
the or
button.
You can use automatic climate
control to
set the airflow in the rear compartment
sep ...
