Parking brake

WARNING Engaging the parking brake while the vehicle 
Engaging the parking brake while the vehicle is in motion can cause the rear wheels to lock up. You could lose control of the vehicle and cause an accident. In addition, the vehicle's brake lights do not light up when the parking brake is engaged.

WARNING When leaving the vehicle, always remove the 
When leaving the vehicle, always remove the SmartKey from the starter switch, take it with you, and lock the vehicle. Do not leave children unattended in the vehicle, or with access to an unlocked vehicle. Children could release the parking brake and/or shift the automatic transmission out of park position P, either of which could result in an accident and/or serious personal injury.

► To apply: depress parking brake 2

To apply: depress parking brake 2 firmly.

When the engine is running, the (USA (USA only) or lamp (Canada only) indicator lamp lights up in the instrument cluster.

To release: depress the brake pedal and keep it depressed.

Pull release handle 1.

When the ignition is switched on or the engine is running, the or  (Canada only) indicator lamp (USA only) or goes out (Canada only) indicator lamp goes out in the instrument cluster.

    See also:

    Closing the hood
    WARNING When closing the hood, use extreme caution not to catch hands or fingers. Be careful that you do not close the hood on anyone. Make sure the hood is securely engaged before driving of ...

    Setting the rear-compartment airflow using the rear control panel
    Turn the SmartKey to position 2 in the ignition lock. To increase/reduce: press rocker switch 14 up or down. ...

    Creating new contacts/changing contacts
    In certain countries, this function stops being available from a vehicle speed of more than approximately 3 mph (5 km/h). As soon as the speed falls below approximately 2 mph (3 km/h), the f ...