Cleaning the wiper blades

WARNING
Before cleaning the windshield or wiper blades, switch off the windshield wipers and remove the SmartKey from the ignition lock.
On vehicles with KEYLESS-GO, press the Start/Stop button repeatedly until all indicator lamps in the instrument cluster have gone out. The windshield wipers could otherwise move and injure you.

away from Only fold the windshield wipers away from the windshield when vertical. Otherwise, you will damage the hood.

Otherwise, Do not pull the wiper blade. Otherwise, the wiper blade could be damaged.

often and Do not clean wiper blades too often and do not rub them too hard. Otherwise, the graphite coating could be damaged. This could cause wiper noise.

windshield.  Fold the wiper arms away from the windshield.
damp cloth.  Carefully clean the wiper blades with a damp cloth.
before switching on the ignition.  Fold the windshield wipers back again before switching on the ignition.

folding Hold the wiper arm securely when folding back. The windshield could be damaged if the wiper arm smacks against it suddenly.

    See also:

    Load index
    Tire data is vehicle-specific and may deviate from the data in the example. In addition to the load bearing index, load index 1 may be imprinted after the letters that identify speed index 6 ...

    Opening and closing
    Overhead control panel To open To open To close Turn the SmartKey to position 1 or 2 in the ignition lock. Press or pull the switch in the corresponding direction. If you press ...

    Vehicle identification number (VIN)
    The vehicle identification number (VIN) can be found in the following locations: • on the vehicle identification plate • at the lower edge of the windshield In addition to being stamped on th ...