Replacing the rear window wiper blade

Removing the wiper blade

Removing the wiper blade
Removing the wiper blade

ignition lock. Remove the SmartKey from the ignition lock.
window until it engages. Fold wiper arm 1 away from the rear window until it engages.
angle to wiper arm 1. Position wiper blade 2 at a right angle to wiper arm 1.
blade 2 in the direction of the arrow until it releases. Hold wiper arm 1 and press wiper blade 2 in the direction of the arrow until it releases.
Installing the wiper blade Remove wiper blade 2.

Installing the wiper blade

wiper arm 1. Place new wiper blade 2 onto wiper arm 1.
blade 2 in the opposite direction to the arrow until it engages. Hold wiper arm 1 and press wiper blade 2 in the opposite direction to the arrow until it engages.
seated correctly. Make sure that wiper blade 2 is seated correctly.
wiper arm 1. Position wiper blade 2 parallel to wiper arm 1.
window. Fold wiper arm 1 back onto the rear window.

    See also:

    Useful information
    This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differenc ...

    Setting the rear-compartment air vents
    Setting the center vents in the rear compartment 1. Rear-compartment air vent thumbwheel 2. Rear-compartment air vent, right 3. Rear control panel for automatic climate control 4. R ...

    Tire pressure of at least 180 kPa(1.8 bar/26 psi) is not reached
    If, after five minutes, a pressure of 180 kPa (1.8 bar/26 psi) has not been achieved: ► Press the on/off switch on the tire inflation compressor to 0. The tire inflation compressor is ...