Daytime running lamps
Daytime running lamps in Canada
The daytime running lamps function is required by law in Canada. It cannot therefore be deactivated.
•► Turn the light switch to
or
.
With the engine running: depending on the ambient light, the daytime running lamps or the low-beam headlamps are switched on.
When the low-beam headlamps are
switched on, the
indicator lamp in
the
instrument cluster lights up.
When the engine is running and the vehicle is stationary: if you move the selector lever from a drive position to P, the daytime running lamps/low-beam headlamps go out after three minutes.
When the engine is running, the vehicle is
stationary and in high ambient light
brightness: if you turn the light switch
to
, the daytime running lamps and
the
parking lamps are switched on.
If the engine is running and you turn the light
switch to
, the manual settings take
precedence over the daytime running lamps.
Daytime running lamps in the USA
In the USA, the daytime running lamps are deactivated upon delivery from the factory.
•► To activate the daytime running lamps: activate the daytime running lamps function in the on-board computer
•► Turn the light switch to
or
.
With the engine running: depending on the ambient light, the daytime running lamps or the low-beam headlamps are switched on.
When the low-beam headlamps are
switched on, the
indicator lamp in
the
instrument cluster lights up.
If the engine is running and you turn the light
switch to
or
, the manual settings
take precedence over the daytime running
lamps.
See also:
Important safety notes
Have the batteries changed at a qualified
specialist workshop.
WARNING
Batteries contain toxic substances.
Swallowing batteries can lead to serious
health issues or death.
Keep batteries out ...
Exterior
The coupe version of the S-Class sedan, the CL-Class sits very near the top
of the Mercedes-Benz range, and would be a rare thing in anybody's lineup: a
large coupe. And when I say large, I mean i ...
Inserting the brackets into the loading
rail
– Insert bracket 1 into the center of loading
rail 4.
– Press release button 2 and push
bracket 1 into the desired position in
loading rail 4.
– Let go of release button 2.
– Press lockin ...
