Activating/deactivating PRE-SAFE® Brake
PRE-SAFE® Brake is only available in vehicles with DISTRONIC PLUS.
Press the or button on the steering wheel to select the DriveAssist menu.
Press or to select PRE-SAFE Brake.
Press .
The current selection is displayed.
To activate/deactivate: press again.
When PRE-SAFE® Brake is activated, the multifunction display shows the symbol as long as the HOLD function is not activated.
See also:
Driving systems
Display messages
Level Selection
Not Permitted
Possible causes/consequences and ►
Solutions
You cannot change the vehicle level, because:
• you are exceeding the permissible speed ...
Automatic transmission
WARNING
It is dangerous to shift the automatic
transmission out of parking position P or
neutral position N if the engine speed is
higher than idle speed. If your foot is not firmly
on the b ...
Important safety notes
WARNING
When operating the climate control, the air that enters the passenger compartment
through the air vents can be very hot or very cold (depending on the set temperature).
This could ca ...