Engaging the electric parking brake automatically

The electric parking brake is automatically applied if HOLD or DISTRONIC PLUS brakes the vehicle until it is stationary and at least one of the following conditions is fulfilled:
• the engine is switched off.
• the driver's door is open and the seat belt is not fastened.
• the hood is released.
• the trunk lid is opened while the automatic transmission is in position R.
• the vehicle is stationary for a lengthy period.

The red (Canada (USA only) or only) indicator lamp in the instrument cluster (Canada only) indicator lamp in the instrument cluster lights up.

P may also be engaged automatically. In addition to the electric parking brake, P may also be engaged automatically.

    See also:

    Emergency Tensioning Devices, belt force limiters
    The front seat belts and the outer seat belts in the rear are equipped with ETDs and seat belt force limiters. The ETDs tighten the seat belts in an accident, pulling them close against the bod ...

    Automatic locking feature
    The vehicle locks automatically when the ignition is switched on and the wheels of the vehicle are turning at a speed of more than 9 mph (15 km/h). You could therefore be locked out when: • th ...

    Crash-responsive EASY-EXIT feature
    If the crash-responsive EASY-EXIT feature is triggered in an accident, the steering column will move upwards when the driver's door is opened. This occurs irrespective of the position of the S ...