Setting the specified minimum distance

You can set the specified minimum distance for DISTRONIC PLUS by varying the time span between one and two seconds. With this function, you can set the minimum distance that DISTRONIC PLUS keeps to the vehicle in front, dependent on vehicle speed. You can see this distance in the multifunction display.

WARNING
It is up to the driver to exercise discretion to select the appropriate setting given road conditions, traffic, driver's preferred driving style and applicable laws and driving recommendations for safe following distance.

To increase: turn control

2 in direction 3. To increase: turn control 2 in direction 3.
DISTRONIC PLUS then maintains a greater distance between your vehicle and the vehicle in front.
in direction 1. To decrease: turn control 2 in direction 1.
DISTRONIC PLUS then maintains a shorter distance between your vehicle and the vehicle in front.

sufficient Make sure that you maintain a sufficient and safe distance from the vehicle in front.

Adjust the distance to the vehicle in front if necessary.

    See also:

    Checking tire pressures manually
    To determine and set the correct tire pressure, proceed as follows: – Remove the valve cap of the tire that is to be checked. – Press the tire pressure gauge securely onto the valve. – Read t ...

    Setting the airflow
    You can set the airflow separately for the driver’s and front-passenger side. Select left airflow 3 or right airflow 5 by turning the COMAND controller and press to confirm. To adjust th ...

    Making adjustments in 1 mph (Canada:

    1 km/h) increments
    Briefly press the cruise control lever to the pressure point, up 1 for a higher speed or down 2 for a lower speed. The last speed stored is increased or reduced. ...