Installing the towing eye

Vehicles with a trailer tow hitch: if possible, secure the towing device on the trailer tow hitch.

– Remove the towing eye required for frontal or rear coupling from the vehicle tool kit.

The mountings for the removable towing eyes are located in the bumpers. They are at the front and at the rear, under the covers.

Observe the identification labels on the Observe the identification labels on the towing eyes and the information panels on using the towing eyes with the vehicle. The towing eyes must be installed in the correct positions. Install the longer towing eye at the front of the vehicle and the shorter towing eye at the back.

– To open the cover at the front: press

– To open the cover at the front: press cover 1 inwards in the direction of the arrow at the marking.
– To open the cover at the rear: insert a flat, blunt object into the cutout and lever off cover 2 from the bumper.
– Take cover 1 or 2 off the opening.
– Screw the towing eye in clockwise to the stop and tighten it.

    See also:

    Important safety notes
    If a tire pressure monitor system is installed, the vehicle's wheels have sensors that monitor the tire pressures in all four tires. The tire pressure monitor warns you if the pressure drops i ...

    Adjusting the climate mode settings (AIR FLOW)
    This function is only available with 3-zone automatic climate control. The climate mode settings are especially effective at high temperatures. You can select the following climate mode settin ...

    Notes
    The vehicle tool kit can be found in the stowage well under the cargo compartment floor. When they leave the factory, vehicles without a "Minispare" emergency spare wheel are n ...