Switching on the manual drive program

The manual drive program is only available for vehicles with the dynamic handling package and for AMG vehicles.

Manual drive program M is different from drive program S (in AMG vehicles, drive programs S and S+) with regard to spontaneity, responsiveness and smoothness of gear changes.

Manual drive program M can be selected using the drive program selector or the program selector button. You can change gears using the steering wheel paddle shifters or the selector lever in manual drive program M if the transmission is in position D.

button repeatedly until M appears in the multifunction display. Press the program selector button repeatedly until M appears in the multifunction display.
program selector until M appears in the multifunction display. AMG vehicles: turn the drive program selector until M appears in the multifunction display.
The indicator M on the drive program selector lights up in red.

    See also:

    Driving tips
    Observe the information on ESP® trailer stabilization (Y page 64) and on pulling away with a trailer. The maximum permissible speed for vehicle/ trailer combinations depends on the type of ...

    Connecting an external device
    Do not leave external devices in the vehicle as extreme temperatures (e.g. direct sunlight or extremely low outside temperatures) could cause them to malfunction (see the operating instructions ...

    Manual interior lighting control
    - To switch the front interior lighting on: set the rocker switch to the position. - To switch the front interior lighting off: set the rocker switch to the position. - To switch the rear in ...