Transmission positions

Do not shift the transmission into Park position

Do not shift the transmission into position P unless the vehicle is stationary. The parking lock should not be used as a brake when parking. In addition to engaging the parking lock, you must always apply the parking brake to secure the vehicle.
The SmartKey can only be removed if the transmission is in position P.
If the SmartKey is removed from the ignition lock, the selector lever is locked.
If the vehicle electronics are malfunctioning, the selector lever may be locked in position P. To release the selector lever lock, see "Releasing the parking lock manually".

Only shift the transmission to R Reverse gear

Only shift the transmission to R when the vehicle is stationary.

Do not shift the transmission to N Neutral

Do not shift the transmission to N while driving. The transmission could otherwise be damaged.

No power is transmitted from the engine to the drive wheels.

Releasing the brakes will allow you to move the vehicle freely, e.g. to push it or tow it.

If ESP® is deactivated or faulty:

only shift the transmission to position N if the vehicle is in danger of skidding, e.g. on icy roads.

the drive train. Rolling in neutral N can damage the drive train.

The automatic transmission Drive

The automatic transmission changes gear automatically. All forward gears are available.

    See also:

    High-beam headlamps (halogen headlamps)
    Switch off the lights. Open the hood. Remove the headlamp cover (). Left-hand headlamp: detach the washer fluid reservoir (). Turn housing cover 1 counter-clockwise and pull it out. Pre ...

    Front-end structure: crumple zone on four levels
    Compared to the previous model series, the Mercedes engineers have further enlarged the deformation zones substantially in the front and rear sections of the new CLS, as well as improving the ener ...

    Example: step 1 to 3
    The following table shows examples on how to calculate total and cargo load capacities with varying seating configurations and number and size of occupants. The following examples use a load l ...