Replacing the rear window wiper blade
Removing the wiper blade
Removing the wiper blade
Remove the SmartKey from the
ignition lock.
Fold wiper arm 1 away from the rear
window until it engages.
Position wiper blade 2 at a right
angle to wiper arm 1.
Hold wiper arm 1 and press wiper
blade 2 in the direction of the arrow until it releases.
Remove wiper blade 2.
Installing the wiper blade
Place new wiper blade 2 onto
wiper arm 1.
Hold wiper arm 1 and press wiper
blade 2 in the opposite direction to the arrow until it engages.
Make sure that wiper blade 2 is
seated correctly.
Position wiper blade 2 parallel to
wiper arm 1.
Fold wiper arm 1 back onto the rear
window.
See also:
SRS warning lamp
SRS functions are checked regularly when
you switch on the ignition and when the
engine is running. Therefore, malfunctions
can be detected in good time.
The SRS warning lamp in the
instrume ...
Making adjustments in 5 mph (Canada:
10 km/h) increments
Briefly press the cruise control lever
beyond the pressure point, up 1 for a
higher speed or down 2 for a lower speed.
The last speed stored is increased or
reduced. ...
Important safety notes
WARNING
When towing a trailer, incorrect equipment and driving style could cause you
to lose control of the vehicle.
Towing incorrectly or not observing this Operator's Manual could lead ...