Replacing the windshield wiper blades

Removing the wiper blades

ignition lock or turn it to position 0 (KEYLESS-GO). Remove the SmartKey from the ignition lock or turn it to position 0 (KEYLESS-GO).
windshield until it engages. Fold the wiper arm away from the windshield until it engages.
to the wiper arm. Set the wiper blade at right angles to the wiper arm.

Remove the wiper blade from the

retaining Remove the wiper blade from the retaining pin on the wiper arm in the direction of the arrow.

Installing the wiper blades

the Push the new wiper blade onto the retaining pin on the wiper arm in the opposite direction to the arrow.
Make sure that the wiper blade slides fully onto the retaining pin on the wiper arm.
the wiper Turn the wiper blade parallel to the wiper arm.
windshield. Fold the wiper arm back onto the windshield.

    See also:

    Instruction labels for tires and loads
    WARNING Do not overload the tires by exceeding the specified load limit as indicated on the Tire and Loading Information placard on the driver's door B-pillar. Overloading the tires can over ...

    Setting the exterior mirrors
    This function is only available in vehicles for Canada. If the battery has been disconnected or completely discharged, the exterior mirrors must be reset. The exterior mirrors will otherwise ...

    Switching the rear-compartment climate control on/off using the rear control panel
    Turn the SmartKey to position 2 in the ignition lock. To switch on: press rocker switch 15 up or down and select AUTO. or Press rocker switch 15 up or down and select MAN. To switch of ...