High-beam headlamps (halogen headlamps)

High-beam headlamps (halogen headlamps)
High-beam headlamps (halogen headlamps)

Open the hood. Switch off the lights.
Turn housing cover 1 Open the hood.
counter-clockwise and pull it out. Turn housing cover 1 counter-clockwise and pull it out.
counter-clockwise and pull it out. Turn bulb holder 2 counter-clockwise and pull it out.
2. Take the bulb out of bulb holder 2.
holder 2. Insert the new bulb into bulb holder 2.
and turn it clockwise. Insert bulb holder 2 into the lamp and turn it clockwise.
clockwise until it engages. Align housing cover 1 and turn it clockwise until it engages.

    See also:

    Driving systems
    Problem Possible causes/consequences and Solutions The red distance warning lamp lights up while the vehicle is in motion. A warning tone also sounds. R ...

    Removing a wheel
    – Unscrew the uppermost wheel bolt completely. – Screw alignment bolt 1 into the thread instead of the wheel bolt. – Unscrew the remaining wheel bolts fully. Do not place wheel bolts in ...

    Useful information
    This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences ...