Changing the battery
You require a CR 2025 3 V cell battery.
Take the mechanical key out of
the
SmartKey.

Press mechanical key 2 into the
opening
in the SmartKey in the direction of the arrow until battery tray cover 1 opens.
When doing so, do not hold cover 1 shut.
Remove battery tray cover 1.

Repeatedly tap the SmartKey
against your palm until battery 3 falls out.
Insert the new battery with the
positive terminal facing upwards. Use a lint-free cloth to do so.
Make sure that the surface of the
battery is free from lint, grease and all other forms of contamination.
Insert the front tabs of battery
tray cover 1 and then press to close it.
Insert the mechanical key into the
SmartKey.
Check the function of all SmartKey
buttons on the vehicle.
See also:
Defrosting the windshield
You can use this function to defrost the
windshield or to defrost the inside of the
windshield and the side windows.
You should only select the defrosting
function until the windshield is clear ...
Call disconnection while the vehicle is in motion
A call may be disconnected if:
• there is insufficient network coverage in certain areas.
• you move from one transmitter/receiver area (cell) into another and no
channels are free.
• you u ...
Cargo tie-down rings
Observe the following notes on securing loads:
secure the load using the cargo tie down rings.
do not use elastic straps or nets to secure a load, as these are only intended
as an anti-slip p ...
