Message memory

The on-board computer saves certain display messages. You can call up the display messages in the message memory.

– Press the button on the steering wheel to or select the Serv. menu. button on the steering wheel to select the Serv. menu.
If there are display messages, the multifunction display shows, for example, 2 Messages.
– Press the button to select the entry, e.g. 2 or Messages. button to select the entry, e.g. 2 Messages.
– Confirm witha.
– Press the button to scroll through the or display messages. button to scroll through the display messages.

When the ignition is switched off, all display messages are deleted apart from some highpriority display messages. Once the causes of the high-priority display messages have been rectified, the corresponding display messages are also deleted.

    See also:

    Useful information
    This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are ...

    Replacing the windshield wiper blades
    Removing the wiper blades Before changing the wiper blades, always set the wiper arms to a vertical position using the combination switch. There is otherwise a risk of damaging the hood. Moving ...

    Driving downhill
    • Drive slowly. • Do not drive at an angle down steep inclines. Steer into the line of fall and drive with the front wheels aligned straight. Otherwise, the vehicle could slip sideways, tip and ...