Important safety notes
You will find an illustration of the instrument cluster in the "At a glance".
WARNING
A driver's attention to the road and traffic
conditions must always be his/her primary
focus when driving.
For your safety and the safety of others,
selecting features through the multifunction
steering wheel should only be done by the
driver when traffic and road conditions permit
it to be done safely.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h ), your vehicle is
covering a distance of 44 feet (approximately
14 m) every second.
WARNING
No messages will be displayed if either the
instrument cluster or the multifunction
display is inoperative.
As a result, you will not be able to see
information about your driving conditions,
such as
- speed
- outside temperature
- warning/indicator lamps
- malfunction/warning messages
- failure of any systems
Driving characteristics may be impaired.
If you must continue to drive, do so with added
caution. Contact an authorized Mercedes-
Benz Center as soon as possible.
WARNING
Malfunction and warning messages are only
indicated for certain systems and are
intentionally not very detailed. The
malfunction and warning messages are
simply a reminder with respect to the
operation of certain systems. They do not
replace the owner's and/or driver's
responsibility to maintain the vehicle's
operating safety. Have all required
maintenance and safety checks performed on
the vehicle. Bring the vehicle to an authorized
Mercedes-Benz Center to address the
malfunction and warning messages.
See also:
Activating/deactivating the rear view
camera
– To activate: make sure that the SmartKey
is in position 2 in the ignition lock.
– Make sure that the "rear view camera"
function is selected in COMAND (see the
separate operating in ...
Important safety notes
WARNING
When operating the climate control, the air
that enters the passenger compartment
through the air vents can be very hot or very
cold (depending on the set temperature). This
could ...
Cruise control lever
1 To activate or increase speed
2 To activate or reduce speed
3 To deactivate DISTRONIC PLUS
4 To activate at the current speed/last stored speed
5 To set the specified minimum distance ...
