General notes
The HOLD function can assist the driver in the
following situations:
- when pulling away, especially on steep slopes
- when maneuvering on steep slopes
- when waiting in traffic
The vehicle is kept stationary without the driver having to depress the brake pedal.
The braking effect is canceled and the HOLD function deactivated when you depress the accelerator pedal to pull away.
See also:
ATA (Anti-Theft Alarm system)
alarm system is armed and you open:
• a door
• the vehicle with the mechanical key
• the trunk lid
• the hood
The alarm is not switched off, even if you
close the open door that has tri ...
Securing the vehicle to prevent it fromrolling away
WARNING
Only jack up the vehicle on level ground or on
slight inclines/declines. The vehicle could
otherwise fall off the jack and injure you or
others.
If your vehicle is equipped wi ...
Making adjustments in 1 mph (Canada:1 km/h) increments
► Briefly press the cruise control lever
to the
pressure point, up 1 for a higher speed or
down 2 for a lower speed.
The last speed stored is increased or
reduced. ...