Loading and removing SD cards

the temperatures which may be reached in Not all SD memory cards are designed for the temperatures which may be reached in the vehicle.
Due to the wide range of SD cards available on the market, Mercedes-Benz cannot guarantee playback for all brands of SD memory card.

To load an SD card: press the SD card into

slot 1. The tapered side must point To load an SD card: press the SD card into slot 1. The tapered side must point towards the right.

If the SD card contains MP3 tracks, COMAND will play them back.

into slot 1 as far as it will go and then To remove the SD card: press the SD card into slot 1 as far as it will go and then release it again.

Activating audio CD/DVD or MP3 mode Pull out the card.

    See also:

    Safety guidelines for seat belts, Emergency Tensioning Devices (ETDs) and air bags
    WARNING • Damaged seat belts or seat belts that have been subjected to stress in an accident must be replaced. Their anchoring points must also be checked. Only use seat belts installed or ...

    Activating/deactivating the MONO function
    This function is only available in vehicles for Canada. You can use the MONO function to adopt the temperature and air distribution settings on the driver's side for the front-passenger side. ...

    Steering wheel heating
    Switching on/off The steering-wheel heating heats the leather areas of the steering wheel. ► Make sure that the SmartKey is in position 2 in the ignition lock. ► To switch on/off: ...