Driving on sand
WARNING
Do not reduce the tire inflation pressure
before driving through sand. However, if you
do so, remember to correct the tire inflation
pressure before continuing your trip. Driving
with reduced tire inflation pressure increases
the risk of losing control of the vehicle and
rolling over.
Observe the following rules when driving on sand:
- vehicles with the AIRMATIC package:
select a raised vehicle level.
- avoid high engine speeds.
- select a shift range appropriate to the
terrain.
- drive quickly to overcome the rolling
resistance. Otherwise, the vehicle could dig
itself into the sand.
- drive in the tracks of other vehicles if
possible. Make sure that the ruts are not
too deep, that the sand is firm enough and
that your vehicle has sufficient ground
clearance.
See also:
Windshield washer system andheadlamp cleaning system
The washer fluid reservoir is used for both the
windshield washer system and the headlamp
cleaning system.
Vehicle components and their service
products must match. You should, therefore, only ...
Cleaning the steering wheel and gear or selector lever
Thoroughly wipe with a damp cloth or use
leather care agents that have been
recommended and approved by Mercedes-
Benz. ...
Cleaning instructions
Do not touch the COMAND display. The
display has a very sensitive high-gloss
surface; there is a risk of scratching. If you
have to clean the screen, however, use a
mild cleaning agent and a ...
