Applying automatically

Your vehicle's electric parking brake is automatically applied if DISTRONIC PLUS or the HOLD function bring the vehicle to a standstill, or are engaged to keep the vehicle stationary. In addition, at least one of the following conditions must be fulfilled:
- the engine is switched off.
- the driver's door is open and the seat belt is not fastened.
- the vehicle is stationary for a lengthy period.

The red (Canada (USA only) or only) indicator lamp in the instrument cluster (Canada only) indicator lamp in the instrument cluster lights up.

    See also:

    Activating the rear view camera
    Make sure that the SmartKey is in position 2 in the ignition lock. Make sure that the "rear view camera" function is selected in COMAND (see the separate operating instructions for ...

    Removing the collapsible spare wheel
    The collapsible spare wheel can be found in the stowage well under the trunk floor. Lift the trunk floor up (). Remove stowage well 1. Turn retaining screw 2 counter-clockwise and remo ...

    The windshield wipers are obstructed
    Leaves or snow, for example, may be obstructing the windshield wiper movement. The wiper motor has been deactivated. For safety reasons, you should remove the SmartKey from the ignition lock. ...