High-beam headlamps
- To switch on the high-beam headlamps:
turn the SmartKey in the ignition lock to
position 2 or start the engine.
- Turn the light switch to 
or
or
.
- Press the combination switch beyond the
pressure point in the direction of
arrow 1.
In the or
position, the highbeam
headlamps are only switched on
when it is dark and the engine is running.
The 
indicator lamp in the
instrument
cluster lights up when the high-beam
headlamps are switched on.
- To switch off the high-beam
headlamps: move the combination switch
back to its normal position.
The 
indicator lamp in the
instrument
cluster goes out.
See also:
Charging the battery
WARNING
Never charge a battery still installed in the
vehicle unless a battery charger unit approved
by Mercedes-Benz is being used. Gases may
escape during charging and cause explosions
...
Driving systems
Display messages
Possible causes/consequences and
Solutions
Based on specific criteria, ATTENTION ASSIST has determined that the
driver is tired or paying less attentio ...
Hazard warning lamps
The hazard warning lamps automatically switch on if:
an air bag is deployed.
the vehicle is slowed down severely from a speed of over 45 mph(70 km/h)
and comes to a halt.
To switch on the ...