Headlamp cleaning system
The headlamps are cleaned automatically if the "Wipe with washer fluid" function is operated ten times while the lights are on and the engine is running. When you switch off the ignition, the automatic headlamp cleaning system is reset and counting is resumed from 0.
See also:
Activating the rear view camera
Make sure that the SmartKey is in position
2 in the ignition lock.
Engage reverse gear.
The area behind the vehicle is shown in the
COMAND display with guide lines. ...
Tires
Problem
Possible causes/consequences and
Solutions
USA
only:
The yellow tire pressure
monitor warning lamp
(pressure loss/
malfunction) is lit.
Canada onl ...
Trailer towing
For vehicles with a trailer tow hitch, the
minimum length for parking spaces is slightly
increased.
If you have attached a trailer to your vehicle,
you should not use Active Parking Assist.
On ...