Changing the battery
You require a CR 2025 3 V cell battery.
- Take the mechanical key out of the SmartKey.
- Press mechanical key 2 into the opening in the SmartKey in the direction of the arrow until battery tray cover 1 opens.
When doing so, do not hold cover 1 shut.
- Remove battery tray cover 1.
- Repeatedly tap the SmartKey against your
palm until battery 3 falls out.
- Insert the new battery with the positive
terminal facing upwards. Use a lint-free
cloth to do so.
- Make sure that the surface of the battery is
free from lint, grease and all other forms of
contamination.
- Insert the front tabs of battery tray
cover 1 and then press to close it.
- Insert the mechanical key into the
SmartKey.
- Check the function of all SmartKey buttons
on the vehicle.
See also:
Important safety notes
WARNING
The following factors increase the risk of
accidents:
- Excessive speed, especially in turns
- Wet and slippery road surfaces
- Following another vehicle too closely
The dr ...
Using the TIREFIT kit
You can use the TIREFIT kit to seal small
punctures, particularly those in the tire tread.
You can use TIREFIT at outside temperatures
down to -4 °F (-20
°C).
WARNING
TIREFIT is a limited ...
Headlamps fogged up on the inside
The headlamps may fog up on the inside if
there is high atmospheric humidity.
Drive with the headlamps
switched on.
The level of moisture diminishes,
depending on the length of the journey an ...