Cleaning the wheels
Do not use acidic wheel cleaning products
to remove brake dust. This could damage
wheel bolts and brake components.
Do not park the vehicle for an extended
period straight after cleaning it, particularly
after having cleaned the wheels with wheel
cleaner. Wheel cleaners could cause
increased corrosion of the brake discs and
brake pads/linings. For this reason, you
should drive for a few minutes after cleaning. Braking heats the brake discs and
the brake pads/linings, thus drying them.
The vehicle can then be parked.
See also:
Brake fluid
WARNING
The brake fluid constantly absorbs moisture
from the air; this lowers its boiling point.
If the boiling point of the brake fluid is too low,
vapor pockets may form in the brake ...
Information about driving abroad
Converting to symmetrical low beam
when driving abroad: switch the headlamps
to symmetrical low beam in countries in
which traffic drives on the opposite side of the
road to the country where ...
Introduction
In transmission position D, you can use the
steering wheel paddle shifter to restrict or
derestrict the shift range for the automatic
transmission (Y page 147).
The shift range selected is show ...