Seat belt retractor

The inertia reel can be used to secure light

The inertia reel can be used to secure light loads against the side wall of the cargo compartment to prevent them from moving around.

► Insert two mounting elements 2 into a loading rail.
► Turn mounting elements 2 in the loading rail to ► Insert inertia reel 3 into mounting.
► Insert inertia reel 3 into mounting elements 2.
► Turn mounting element 2 to you feel it clearly engage in the loading rail. until you feel it clearly engage in the loading rail.
► Press unlocking button 1 on inertia reel 3 and pull the cargo net out in the direction of the arrow.
► Place the load between the securing net and the cargo compartment side wall.
► Using one hand, press locking button 1 of inertia reel 3.
► With your other hand, slowly extend the net around the load until it is secure.

    See also:

    Problems with the sliding sunroof
    Your vehicle may be equipped with a sliding sunroof or a panorama roof with power tilt/ sliding panel. In the following section, the term "sliding sunroof" refers to both types of sl ...

    General notes
    The HOLD function can assist the driver in the following situations: • when pulling away, especially on steep slopes • when maneuvering on steep slopes • when waiting in traffic The vehicle is kep ...

    Vehicle identification number (VIN)
    The vehicle identification number (VIN) can be found in the following locations: • on the vehicle identification plate • at the lower edge of the windshield In addition to being stamped on the veh ...