Side marker lamps

- Remove the cover in the front wheel arch.

- Remove the cover in the front wheel arch.
- Turn cap 2 counter-clockwise and remove it.
- Pull out bulb holder 1.
- Take the bulb out of bulb holder 1.
- Insert the new bulb into bulb holder 1.
- Insert bulb holder 1.
- Align cap 2 and turn it clockwise.
- Install the cover in the front wheel arch.

    See also:

    Setting the temperature
    You can set the temperature separately for the driver’s and front-passenger side. Select left temperature display 1 or right temperature display 7 in the airconditioning function bar by turnin ...

    Problems with the seat heating
    The seat heating has switched itself off prematurely. The vehicle's electrical system voltage is too low because too many electrical consumers are switched on. Switch off electrical consumers ...

    Tightening the cargo net
    Seat belt reel holder behind the front seats ► Insert belt hook 1 into cargo tie-down ring 2 in the direction of the arrow. ► Pull tensioning strap 3 by the loose end in the direct ...