Operation
1
Left-hand standing lamps
2
Right-hand standing lamps
3
Lights off/daytime running lamps
4
Automatic headlamp mode/daytime
running lamps
5
Parking lamps, license plate and
instrument cluster lighting
6
Low-beam/high-beam headlamps
7
Vehicles without front fog lamps:
rear fog lamp
7
Vehicles with front fog lamps:
front
fog lamp
8
Vehicles with front fog lamps:
rear
fog lamp
The turn signals, high-beam headlamps and the high-beam flasher are operated using the combination switch.
Switch off the parking lamps and standing
lamps when you leave the vehicle. This
prevents the battery from discharging.
The exterior lighting (except the parking/ standing lamps) switches off automatically if you:
• remove the SmartKey from the ignition
lock
• open the driver's door with the SmartKey
in position 0
If you hear a warning tone when you leave the vehicle, the lights may still be switched on.
► Turn the light switch to
.
or
► If the rear fog lamp is switched on: press
the light switch in to the stop.
See also:
Switching the display design
Select Settings using the
button
and confirm with the button.
Select Day Mode, Night Mode or
Automatic using the buttons
and press the button to confirm.
The icon indicates the curren ...
Hazard warning lamps
The hazard warning lamps automatically
switch on if:
- an air bag is deployed.
- the vehicle is slowed down severely from a
speed of over 45 mph(70 km/h) and comes
to a halt.
...
General notes
The Active Driving Assistance package
consists of DISTRONIC PLUS,
Active Blind Spot Assist and
Active Lane Keeping Assist. ...