Immobilizer
The immobilizer prevents your vehicle from being started without the correct SmartKey.
When leaving the vehicle, always take the SmartKey with you and lock the vehicle. The engine can be started by anyone with a valid SmartKey that is left inside the vehicle.
► To activate with the SmartKey: remove
the SmartKey from the ignition lock.
► To activate with KEYLESS-GO: switch the
ignition off and open the driver's door.
► To deactivate: switch on the ignition.
The immobilizer is always deactivated
when you start the engine.
In the event that the engine cannot be started when the starter battery is fully charged, the immobilizer may be faulty.
Contact an authorized Mercedes-Benz Center or call 1-800-FOR-MERCedes (in USA) or 1-800-387-0100 (in Canada).
See also:
Important safety notes
If a tire pressure monitor system is installed,
the vehicle's wheels have sensors that
monitor the tire pressures in all four tires. The
tire pressure monitor warns you when the
pressure drops in ...
High-beam flasher
- To switch on: turn the SmartKey in the
ignition lock to position 1 or 2 or start the
engine.
- Pull the combination switch in the direction
of arrow 3. ...
Tire pressure of at least 180 kPa
(1.8 bar/26 psi) is not reached
If, after five minutes, a pressure of 180 kPa
(1.8 bar/26 psi) has not been achieved:
– Switch off the tire inflation compressor.
– Unscrew the filler hose from the valve of
the faulty tire.
– ...