Important safety notes
WARNING
If you tow the vehicle, you must use a rigid towing bar if:
- the engine is not running.
- there is a brake system malfunction.
- there is a malfunction in the power supply or the vehicle's electrical system.
The power assistance for the steering and the brake force booster do not work when the engine is not running. You will need more force to steer and brake, you may have to depress the brake pedal with maximum force.
Before towing away, make sure that the steering can be moved and is not locked. If you tow or tow-start another vehicle, its weight must not exceed the maximum permissible gross vehicle weight of your vehicle.
It is better to have the vehicle transported than to have it towed.
You may only tow the vehicle a maximum distance of 30 miles (50 km). A towing
speed of 30 mph (50 km/h) must not be exceeded.
For towing distances over 30 miles (50 km), the vehicle must loaded onto a transporter.
Only secure the tow rope or tow bar at the towing eyes. Otherwise, the vehicle
could be damaged.
Do not use the towing eye for recovery, as this could damage the vehicle. If
in doubt, recover the vehicle with a crane.
When towing, pull away slowly and smoothly. If the tractive power is too high,
the vehicles could be damaged.
Do not tow with sling-type equipment. This could damage the vehicle.
On vehicles with KEYLESS-GO, use the SmartKey instead of the Start/Stop button.
Turn the SmartKey to position 2 in the ignition lock and shift the automatic transmission
to N. Then, turn the SmartKey back to 0 and leave it in the ignition lock.
The automatic transmission must be in position N when the vehicle is being towed.
The battery must be connected and charged. Otherwise, you:
- cannot turn the SmartKey to position 2 in the ignition lock
- cannot shift the automatic transmission to position N
Release the selector lever lock manually to move it out of position P().
Before the vehicle is towed, switch off the automatic locking feature (). You could otherwise be locked out when pushing or towing the vehicle.
See also:
Changing batteries
Batteries are required for the remote control
and for the two sets of cordless headphones.
Changing batteries. ...
How the occupant classificationsystem works
The OCS is standard equipment in the USA.
The OCS categorizes the occupant on the
front-passenger seat by means of a weight
sensor. The front-passenger front air bag is
deactivated automatically ...
Side impact air bags
WARNING
The pressure sensors for side impact air bag
control are located in the doors. Do not modify any components of the doors or
door
trim panels including, for example, the
addit ...
