Vehicle
Activating/deactivating the automatic door locking feature
If you select the Auto. Door Locks function, the vehicle is centrally locked above a speed of around 9 mph (15 km/h).
For further information on the
automatic
locking feature.
Press the
or
button on the
steering wheel to select the Settings
menu.
Press the
or
button to select the
Vehicle submenu.
Press the
button to confirm.
Press the
or
button to select the
Auto. Door Locks function.
When the Auto. Door Locks function is
activated, the vehicle doors are displayed
in red in the multifunction display.
Press the
button to save the setting.
Activating/deactivating the acoustic locking verification signal
If you activate the Acoustic Lock function,
an audible signal sounds depending on the
vehicle's date of manufacture:
• when locking
or
• once when unlocking and three times when locking
Press the
or
button on the
steering wheel to select the Settings
menu.
Press the
or
button to select the
Vehicle submenu.
Press the
button to confirm.
Press the
or
button to select the
Acoustic Lock function.
If the Acoustic Lock function is activated,
the
symbol in the multifunction
display lights up red.
Press the
button to save the setting.
Activating/deactivating the radar sensor system
The following systems are switched off when
the radar sensor system is deactivated:
• DISTRONIC PLUS
• BAS PLUS
• PRE-SAFE® Brake
• Blind Spot Assist
• Active Blind Spot Assist
USA only: This device has been
approved
by the FCC as a "Vehicular Radar System".
The radar sensor is intended for use in an
automotive radar system only. Removal,
tampering, or altering of the device will void
any warranties, and is not permitted by the
FCC. Do not tamper with, alter, or use in
any non-approved way.
Any unauthorized modification to this
device could void the user's authority to
operate the equipment.
Canada only:
This device complies with RSS-210 of
Industry Canada. Operation is subject to
the following two conditions:
1. This device may not cause harmful
interference, and
2. this device must accept any interference
received, including interference that may
cause undesired operation.
Any unauthorized modification to this
device could void the user's authority to
operate the equipment.
Press the
or
button on the
steering wheel to select the Settings
menu.
Press the
or
button to select the
Vehicle submenu.
Press the
button to confirm.
Press the
or
button to select
Radar Sensor (See Oper. Manual):.
You will see the selected setting: Enabled
or Disabled.
Press the
button to save the setting.
See also:
Entering an intermediate stop
Introduction
When route guidance is active, you can enter
an intermediate stop. Intermediate stops can
be predefined destinations from the following
categories that COMAND offers for selection: ...
High-beam flasher
► To switch on: turn the SmartKey in the
ignition lock to position 1 or 2 or start the
engine.
► Pull the combination switch in the
direction
of arrow 3. ...
Manual interior lighting control
To switch the front interior lighting on/ off: press the
button.
To switch the rear interior lighting on/ off: press the
button.
To switch the reading lamps on/off: press the
button.
...
