Cleaning the wiper blades
WARNING
Before cleaning the windshield or wiper blades, switch off the windshield wipers and remove the SmartKey from the ignition lock. On vehicles with KEYLESS-GO, press the Start/Stop button repeatedly until all indicator lamps in the instrument cluster have gone out. The windshield wipers could otherwise move and injure you.
Only fold the windshield wipers away from the windshield when vertical. Otherwise,
you will damage the hood.
Do not pull the wiper blade. Otherwise, the wiper blade could be damaged.
Do not clean wiper blades too often and do not rub them too hard. Otherwise,
the graphite coating could be damaged. This could cause wiper noise.
- Fold the wiper arms away from the windshield.
- Carefully clean the wiper blades with a damp cloth.
- Fold the windshield wipers back again before switching on the ignition.
Hold the wiper arm securely when folding back. The windshield could be damaged
if the wiper arm smacks against it suddenly.
See also:
GVWR (Gross Vehicle Weight Rating)
The GVWR is the maximum permissible gross
weight of a fully loaded vehicle (the weight of
the vehicle including all accessories,
occupants, fuel, luggage and the drawbar
noseweight, if applica ...
Activating the rear view camera
Make sure that the SmartKey is in position 2 in the ignition lock.
Make sure that the "rear view camera" function is selected in COMAND (see
the separate operating instructions for C ...
General notes
USA only:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful
interference, and
2. this devic ...