Removing a wheel
Unscrew the uppermost wheel bolt
completely.
Screw alignment bolt 1 into the thread
instead of the wheel bolt.
Unscrew the remaining wheel bolts fully.
Do not place wheel bolts in sand or on a
dirty surface. The bolt and wheel hub
threads could otherwise be damaged when
you screw them in.
Remove the wheel.
See also:
Uniform Tire Quality Grading
Standards
A uniform standard to grade the quality of
tires with regards to tread quality, tire traction
and temperature characteristics. Ratings are
determined by tire manufacturers using U.S.
government ...
Checking the oil level using the onboard
computer
On vehicles with a 12-cylinder engine, the oil
level can be checked using the on-board
computer. On all other models, the dipstick
must be used to check the engine oil level.
Park the vehicle ...
Refrigerant of the air-conditioning
system
The air-conditioning system is filled with
R134a refrigerant and a special PAG
lubricant.
Never use refrigerant R 12 (CFC) or
mineral lubricants. Otherwise, you could
damage the air-cond ...