Trailer power supply
The trailer socket of your vehicle is equipped at the factory with a permanent power supply. The permanent power supply is supplied via trailer socket pin 4.
You can connect accessories with a maximum power consumption of 240 W to the
permanent power supply. You must not charge a trailer battery using the power supply.
The trailer's permanent power supply is switched off in the event of low vehicle supply voltage and after six hours at the latest. You can obtain further information about installing the trailer's electrical equipment from a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center.
See also:
Unlocking the trunk (mechanical key
The trunk lid swings upwards
when
opened. Therefore, make sure that there is
sufficient clearance above the trunk lid.
If the trunk cannot be unlocked with the
SmartKey or KEYLESS-GO, use th ...
Installing the towing eye
Vehicles with a trailer tow hitch: if possible,
secure the towing device on the trailer tow
hitch.
– Remove the towing eye required for frontal
or rear coupling from the vehicle tool kit.
The ...
Setting the exterior mirrors
This function is only available in vehicles for
Canada.
If the battery has been disconnected or
completely discharged, the exterior mirrors
must be reset. The exterior mirrors will
otherwise ...