Activation conditions
You can activate the HOLD function if:
Rthe vehicle is stationary.
Rthe engine is running.
Rthe driver's door is closed or if your seat belt is fastened.
Rthe electric parking brake is released.
Rthe transmission is in position D, R or N.
RDISTRONIC PLUS is deactivated.
See also:
Notes on selecting, mounting and
replacing tires
- Only mount tires and wheels of the same
type and make.
- Only mount tires of the correct size onto
the wheels.
- After mounting new tires, run them in at
moderate speeds for the first 60 mil ...
Problems with the seat ventilation
The seat ventilation has switched off
prematurely. The vehicle's electrical system
voltage is too low because too many electrical
consumers are switched on.
Switch off electrical consumers whi ...
Cleaning the trailer tow hitch
The ball coupling must be cleaned if it becomes dirty or corroded.
Remove rust on the ball of the ball coupling, e.g. with a wire brush.
Remove dirt with a clean, lint-free cloth or a brush.
A ...
