High-beam headlamps
- To switch on the high-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine.
- Turn the light switch to
or 
or
. - Press the combination switch beyond the pressure point in the direction
of arrow 1.
In the or
position, the highbeam headlamps
are only switched on when it is dark and the engine is running. The
indicator lamp in the instrument
cluster lights up when the high-beam headlamps are switched on. - To switch off the high-beam headlamps: move the combination switch back
to its normal position. The indicator
lamp in the instrument cluster goes out.
See also:
Adjusting the lumbar support
You can adjust the lumbar support using
COMAND. ...
General notes
If you cannot lock or unlock the vehicle with the SmartKey, either the battery
in the SmartKey is discharged, the SmartKey is faulty or the starter battery is
discharged.
Check the battery in ...
Closing
•► Replace the fuel filler cap and turn it
clockwise. The fuel filler cap audibly
engages.
•► Press the fuel filler flap closed until it
engages audibly.
If you drive with the fuel ...