Switching on/off
The three red indicator lamps in the button indicate the heating level you have selected.
If the battery voltage is too low, the seat heating may switch off.
Driver's and front-passenger seat
The system automatically switches down from level 3 to level 2 after approximately eight minutes.
The system automatically switches down from level 2 to level 1 after approximately ten minutes.
The system automatically switches off approximately 20 minutes after it is set to level 1.
- Make sure that the SmartKey is in position 2 in the ignition lock.
- To switch on: press button 1 repeatedly until the desired heating level is set.
- To switch off: press button 1 repeatedly until all the indicator lamps go out.
See also:
SPLITVIEW
SPLITVIEW allows you to simultaneously use
different COMAND functions on the frontpassenger
side and on the driver's side.
Depending on the viewing angle of the display
(from the driver's seat ...
Limited braking performance on salttreated
roads
WARNING
The layer of salt on the brake discs and the
brake pads/linings may cause a delay in the
braking effect, resulting in a significantly
longer braking distance, which could lead to
an ...
Making adjustments in 1 mph (Canada:
1 km/h) increments
Briefly press the cruise control lever to the
pressure point, up 1 for a higher speed or
down 2 for a lower speed.
The last speed stored is increased or
reduced. ...