Applying/releasing manually
– To apply: press handle 1.
The red (USA only) or
(Canada
only) indicator lamp in the instrument
cluster lights up.
The electric parking brake can also be
applied when the SmartKey is removed.
– To release: pull handle 1.
The red (USA only) or
(Canada
only) indicator lamp in the instrument
cluster goes out.
The electric parking brake cannot be
released unless the SmartKey is in position
1 in the ignition lock or the ignition has
been switched on using the Start/Stop
button.
To ensure that you don't roll backwards when pulling away on an uphill slope, engage the electric parking brake.
See also:
Making adjustments in 5 mph (Canada: 10 km/h) increments
Briefly press the cruise control lever beyond the pressure point, up 1 for a
higher speed or down 2 for a lower speed. The last speed stored is increased or
reduced. ...
Resetting the rear sunblind
Door control panel in rear
Turn the SmartKey to position 1 or 2 in the
ignition lock.
Pull switch 1 repeatedly until the rear
roller sunblind is fully closed.
Keep switch 1 pulled for ...
Immobilizer
The immobilizer prevents your vehicle from
being started without the correct SmartKey.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. The
engine can be starte ...