Automatic locking feature
The vehicle locks automatically when the ignition is switched on and the wheels of the vehicle are turning at a speed of more than 9 mph (15 km/h).
You could therefore be locked out when:
- the vehicle is being pushed.
- the vehicle is being towed.
- the vehicle is being tested on a dynamometer.
- To deactivate: press and hold button 1: for about five seconds until a tone sounds.
- To activate: press and hold button 2 for about five seconds until a tone sounds.
If you press one of the two buttons and do not hear a tone, the relevant setting
has already been selected.
You can also switch the automatic locking function on and off using the on-board computer ().
See also:
Mounting a new wheel
WARNING
Always replace wheel bolts that are damaged
or rusted.
Never apply oil or grease to wheel bolts.
Damaged wheel hub threads should be
repaired immediately. Do not continue to
drive un ...
Lights
Display messages about LEDs:
This display message will only appear if all LEDs have failed.
Display messages
Possible causes/consequences and
Solutions
The left or ri ...
Removing the skis and folding up the
skibag
•► Loosen the two straps.
•► Remove hook 1 from securing ring 2.
•► Take the skis out of the skibag.
•► Close the flap in the trunk.
•► Smooth out the skibag and fold ...